- MLS位置传感器中英文产品介绍
- 来源:赛斯维传感器网 发表于 2014/6/20
Applications: Linear displacement, movements, velocites in dirty enviroments, very precise angular measurement using pole wheels
Industries: Engine and Vehicle, General Industry
Description: Sliding the MLS-Sensors along a magnetic scale will produce a sine and a cosine output signal as a function of the position. In order to deliver satisfying results, this will be achieved as long as the air gap between sensor edge and magnetic scale surface does not exceed approximately half of the pole pitch. As the sensor principle is based on the anisotropic magneto resistance effect, the signal amplitudes are nearly independent on the magnetic field strength and therefore air gap variations do not have a strong effect on the accuracy. The sensor detects a magnetic gradient field and is thus almost insensitive to homogenous magnetic stray fields.
Features:
Sin- / Cos-output signals suitable for signal evaluation by standard-ASIC’s
Very high precision
Insensitive to air gap fluctuations
Highly reliable
Low interference field sensitivity
典型应用: 线性位移和速率测量,用磁极轮做角度测量
行业: 发动机和机动车辆, 工业控制
产品描述:
MLS传感器沿着磁尺移动将产生一个正弦和余弦信号。为了得到满意的结果,传感器边沿与磁尺表面的间隙不能超过半个磁极距。由于传感器是基于各向异性磁阻效应,信号幅度是独立于磁场强度的,因此间隙的不同不会影响测量精度。传感器检测磁场梯度,所以对均匀杂散磁场几乎不敏感。
特点:
正弦/余弦输出适合标准ASIC信号评估
高精度
对空隙变化不敏感
高可靠性
对干扰场不敏感
MLS传感器更多技术参数及规格书下载请浏览:http://www.sensorway.cn/sensors/53.html
北京赛斯维测控技术有限公司产品咨询热线:010-84775646,84775648。
- 如果本文收录的图片文字侵犯了您的权益,请及时与我们联系,我们将在24内核实删除,谢谢!